Key Prog Tools - BMW Smart Key Programming OBD Device Vag Commander

Audi / Vag Group

COMMANDER FOR VAG V19.0

The Commander for VAG is a Windows PC based diagnostic software for the vehicles from VAG.
With the help of this tool you can perform operations with vehicles from the VAG group,
which are in most cases unsupported from the producer diagnostic testers.
The Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 ....

Highlights:

Extracting security access codes (PIN) by OBDII
Programming keys by OBDII. Preparation of dealer's keys.
Mileage recalibration by OBDII
Clearing crash data DTCs by OBDII
Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
Exchange speed limit of MMI-TV system
Coding calculator - supported short/long coding
Synchronization/Adaptation KESSY and ELV

Standard diagnostic functions:

Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
Output tests
Control unit coding
Scan all units
Broadcast requests
Measured values
Adaptation

Special functions:

Instrument CAN
- Mileage recalibration by OBDII - VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, VW Passat CC, VW Amarok, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ...
- Added support for VDO Instrument Cluster 2006+
- Read/Program memory of instrument cluster immobilizer
- Reading security access code of the IMMOBILIZER
- Reading security code (PIN) and component protection by OBDII - VW CRAFTER
- Read/Write immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII
- Read/Write immobilizer related data
EZS - Kessy (Q7/A6/Allroad)
- With this function you can prepare dealer key/learn dealer key
- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
Instrument K-Line
- With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
- You can Read/Change odometer value
- Read PIN code
- Read/Write eeprom
- Read ROM/Flash from the Instrument cluster
- Automatic removing of "DEF error" for Audi A4 instrument cluster BOSCH RB8
Engine Control Unit
- Read EDC17/MED17 flash memory
- Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flash memory via OBDII (K and CAN). Calculation of
checksums while programming, ME7.1.1, MED9.x, ME7.5)
- Read/Write flash counters (EDC16)
- Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
- Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
- Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
- Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
- Mileage recalibration (EDC15, EDC16)
Component Protection Manager
- Component Protection Manager - adaptation of spare part (used electronic control units) and programming component protection of Audi A6/Q7/Allroad/A4/A5/Q5
ECU adaptation by OBDII
- ECU adaptation by OBDII - EDC16, EDC17, MED17, MED9, Simos petrol, SIMOS PPD Diesel, ME7.5.20, ME 7.5.30
BCM2 - Audi A4/A5/Q5 2007+ key programming
- The special function makes possible to learn keys for A4/A5/Q5 2007+ vehicles with the BCM2 immobilizer
Steering Lock adaptation
- The window “Steering lock adaptation” can be used for adaptation of steering lock control module to the VW Touareg/VWPhaeton/Porsche Cayenne/Bentley Continental/Audi A8. This adaptation can be by CAN TP2.0 or K-KWP2000
TV activation ED1/ED2
- Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF
Key programming/adaptation
- Programming keys by OBDII (VAG with 16 bytes Component Security) - VW Crafter, Audi R8, VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ... Free for owners of AN024+AN026
- UNLIMITED production of TP22/TP23/TP24/TP25 transponders from a Megamos 48. Free for all owners of AN024, ZN001
- No more precoded transponders (TA2/TA3/TA4/TA5) are used for the key-learning. Instead any Megamos 48 Crypto transponder can be used. Free for all owners of ZN001
- Extracting of the 7th byte Component Security from a working key of the car (Megamos, Hitag2). Free for all owners of AN024, ZN001
- LAMBORGHINI GALLARDO
- With this function you can learn key/transponder to the vehicle
Dump tool
- With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit
Airbag
- Read/Write complete EEPROM of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5..., Skoda Octavia II ..., Seat Altea ...
- With this special function you can Read/Write EEPROM memory of the airbag module
- Clear the crash data of the airbag module
Custom Read/Write
- Using this application you can read/program memory in some electronic control unit
PIN Convertor
Service interval
- Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
- Service intervals reset for the models with UDS diagnostics
Remote control adaptation
- Using this application, you can learn remote controls
Navigation
- Using this application, you can enable/disable the “Eject” button of the “Navigation” system
Cruise control system
- Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available
Brake pads change
- Using this application, you can “Open rear parking brake for pad change”, “Close rear parking
brake”, perform “Parking brake function test”

Prices of the special functions:

AN008 - Read/Write flash/counters ECU - free
AN011 - TV Activation - free
AN012-A - EDC16x - Odometer by OBDII - 240 euro
AN015 - FLASH Memory ECU - free
AN022 - Micronas programmer - 240 euro
AN023 - VW Crafter key programming - 240 euro
AN025 - EDC16/MED9/SIMOS PPD - PIN, Eeprom -720 euro
AN027 - Dealer key for Audi Q7,A6,Allroad(2004-2010) with existing key - 480 euro *(check the footnote )
AN028 - Odometer by CAN - 336 euro
AN029 - IMMO data immobilizer/ECU - 399 euro
AN030 - Key Adaptation (All VAG models) - 480 euro
AN031 - Dealer key preparation including Golf 6, Audi Q7, A6, Allroad -797 euro
AN032 - Read sec. access CAN - 240 euro
AN033 - Read/Write EEPROM ECU - 279 euro
AN034 - Odometer/PIN by K-line - 240 euro
AN036 - Airbag (K-line, CAN) - 399 euro **(check the footnote )
AN037 - ECU adaptation by OBDII - 768 euro
AN038 - BCM2 - Audi A4/A5/Q5 2007+ key programming - 399 euro ***(check the footnote )

AN039 - BCM2 key programming by OBDII - 1920 euro**** (check the foot note )

AN040 - Component protection manager (generation 1/2) - 1920 euro 4*

AN041 - EDC17/MED17 PIN/CS/MAC read by OBDII - 960 euro 5*

AN042 - Read/Write EDC17/MED17 Flash/EEPROM through boot-mode - 384 euro 5*

ZN001 - TAG programmer - Transponder Programmer - 480 euro

VAG Odometer package - includes (AN012-A,28,33,34) - 960 euro
VAG Dealer key package -includes AN023,25,27,29,30,31,32,33,34,39,41

+TAG programmer - 5424 euro

VAG Package 1 - includes (AN012-A,23,25,27,28,29,30,31,32,33,34+39,41

+TAG programmer) - 5856 euro
VAG Package 2 - includes ( AN012-A,23,25,27,28,29,30,31,32,33,34,36,39,40,41

TAG programmer) - 7584 euro
VAG Package 3 - includes (AN012-A,23,25,27,28,29,30,31,32,33,34,36,37,39,40,41,42

+TAG programmer) - 8448 euro

P.S : Ordering of special functions is possible only if you have our diagnostic interface AVDI

Footnote : *Need from a working key and Special Function AN030
** All customers who have the old function AN010 can buy AN036 for 315 Euro (without VAT)
*** To make a key you need to read the BCM2 dump. This is possible eitherby OBDII (if car is with 8K0907298C BCM and has working key) or with the ABPROG(ZN030) with BCM2 adapter

**** To use this feature you must have also enabled functions: AN030 + AN031. This function covers the functionality of AN038, so that new customers do not need to buy AN038. Customers who already have activated AN038 can make updates to AN039 for 1585 Euro , also they have to activate functions AN030 and AN031.

4* All customers who have the old function AN035 will receive AN040 FREE of charge
5* All customers who have the old function AN014 will receive AN041 FREE of charge

VW Amarok key learning video

VW Touareg 2012 key leraning video

AUDI KEY PROGRAMMING DEVICE BY OBD II

Audi A4/A5/S5/RS4/S4/ Q5 2007+, Audi A6 2010+, Audi A8 2010+, Audi A7 2010+, VW Touareg 2010+

AUDI KEY LEARNING DEVICE BY OBD II

NO PC NEEDED/NO PRESSING BUTTONS JUST PLUG THE DEVICE INTO OBD AND LEARN KEY IN 25 SECONDS

- Audi A4 (B8) Typ 8K 2008+
- Audi A5 2007+
- Audi S5 (B8) 2009+
- Audi RS5 2010+
- AUDI RS4 2010-2012
- Audi RS6
- Audi Q5 2007+
- Audi A6 (C7) Typ 4K 2010+
- Audi A7 Sportback 2010+
- Audi A8 (D4) Typ 4H 2010+
- VW Touareg Typ 7P5 2010+
-Audi R8 up to 2011

The BCM2 key-learning device is dedicated to program keys for the vehicles equipped with the BCM2 module.

The key-learning device is equipped with a key programmer, which allows to pre-code the blank keys

The device has the following modes of operation:

*program 1 to 8 keys to the car

*Check whether key is blank

*Switch the alarm OFF

Our device needs 25 seconds to learn a key, also it supports BCM2 modules :

xx0907064xx, 8K0907289C

http://www.youtube.com/watch?v=PqG69CoGFSI&feature=plcp

AUDI Q7/A6/RS6 /ALL ROAD DEVICE BY OBD II

Audi device can learn key to Q7/A6/ALL ROAD for EDC 16 (diesel up to 2009)

and MED 9 (petrol up to 2010)

NO PC NEEDED / NO FUSE JUMPER NEEDED/ Just plug the device into OBD

Device will deactivate the alarm and learn key / transponder in few seconds.

VW KEY LEARNING DEVICE FOR SIEMENS VDO CLUSTER

WITH NEC MCU + 24C32 /24C64 EEPROMS

NO PC NEEDED

Works with all SIEMENS VDO cluster with NEC MCU + 24C32 /24C64 EEPROMS

VAG K+CAN KEY DEVICE 2010

NO PC NEEDED

1. Programming keys/transponders – 1,2,3 or 4 keys
2. Emergency start of the vehicles (without matched transponder) – applicable for vehicles before year 2002
3. Device can perform bypass of the immobilizer of the vehicles equipped with engine control units from BOSCH:
- EDC16x – diesel engines - 1.9 TDI, 2.0 TDI, 2.5 TDI, 2.7 TDI, 3.0 TDI, 4.0 TDI, 4.2 TDI, 5.0 TDI
- EDC15x – diesel engines - 1.9 TDI, 2.5 TDI
- ME7.x – petrol engines - 1.8, 2.0, 2.4, 2.6, 3.0, 3.5, 4.2
All needed is to select by DIP-Switches working mode of device and to connect into OBDII socket of the car .

CLICK HERE TO CHECK THE CAR LIST

VAG BY PASS DEVICE – EDC16,EDC15,ME7

NO PC NEEDED

Device can perform bypass of the immobilizer for the vehicles equipped with engine control units from BOSCH:
- EDC16x – diesel engines - 1.9 TDI, 2.0 TDI, 2.5 TDI, 2.7 TDI, 3.0 TDI, 4.0 TDI, 4.2 TDI, 5.0 TDI
- EDC15x – diesel engines - 1.9 TDI, 2.5 TDI
- ME7.x – petrol engines - 1.8, 2.0, 2.4, 2.6, 3.0, 3.5, 4.2

click here to check the car list

VAG K2 DEVICE

NO PC NEEDED

This Device can perform easily the following functions:

1. Programming of keys/transponders – 1,2,3 or 4 keys
2. Emergency start of the vehicles (without matched transponder) – applicable for vehicles before year 2002
3. Device can perform bypass of the immobilizer for vehicles equipped with engine control units from BOSCH:
- EDC15x – diesel engines - 1.9 TDI, 2.5 TDI
- ME7.x – petrol engines - 1.8, 2.0, 2.4, 2.6, 3.0, 3.5, 4.2

All needed is to select by DIP-Switches working mode of device and to connect it into OBDII socket of the car

CLICK HERE TO CHECK THE CAR LIST

Range / Land Rover

RANGE ROVER /LAND ROVER / JAGUAR KEY LEARNING DEVICE BY OBD II 2010-2015

NO PC NEEDED / NO PIN CODE NEEDED

New update for R/L/J stand alone key programmer ready to cover latest versions that support CAN based models from 2010 up to 2015.
Programmer needs 15 to 25 seconds to learn a new key if the is no fault codes in the air transmitting of the signal from the intelligent key module.
If there is a fault, device need 25 seconds to clear the fault and learn a new key.
Device program the maximum of 8 keys in the immobilizer module memory.
Put (video link) sent on your whats app 23 seconds.

Just plug the device into OBD II and learn a new key remote in few seconds

Range Rover sport - 2010 -2013

Range Rover mark III - 2010 -2013

Range Rover mark IV- 2010 -2013

Range Rover E voque 2012-2013

Land Rover Discovery IV-2010 -2013

Land Rover freelander II- 2012-2013

Jaguar XF - 2010-2013

Jaguar XJ - 2010 -2013

click here to check our you tube video

Opel / Vauxhall

Commander for OPEL/VAUXHALL 5.9

Commander for OPEL/VAUXHALL is a professional software for diagnostic of Opel/Vauxhall vehicles.
It is capable to perform a diagnostic of any unit, which operates under one of the following protocols:
Keyword 82, Keyword 2000 and GMLAN. It provides some unique functions, which are not supported by any other diagnostic tool.

Full compatibility with GM - Tech2Win diagnostic software

Standard diagnostic functions:

For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
Device scan
Data Display / Measured values
Security code programming
Vehicle identification programming
Injector programming - Diesel engines
Programming of the CAN configuration
Program immobilizer function
- Adaptation of Engine Control Module to immobilizer
- Adaptation of Immobilizer to the vehicle
Program immobilizer outputs
- Enable/Disable Anti Theft Warning system

Special functions:

Key programming
- supported all models for programming of keys and remote controls by OBDII - ASTRA J, INSIGNIA, Chevrolet CRUZE and all older ..
- Read mechanical key number
Read security code
- With a new special function ON008 you can read Security code from all Opel/Vauxhall vehicles with CAN BUS by OBDII - Astra H, Corsa D, Vectra C, Zafira B, Agila B, Insignia
- Read security code PSG16 (Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C
- Read security code Simtec 70(X18XE1,X20XEV); Simtec 71(Z22XE); Simtec 75(Z16XER, Z18XER);
Delco HSFI 2.4 (Z16XEP); Denso (A17DTR)
Read/Write EEPROM
- Magneti Marelli 1.3 16V CDTI (Z13DT) - Agila, Corsa C, Tigra B
- SIMTEC71.1(Z18XE,Z18XEL) - Astra G, Corsa C, meriva, Tigra B, Vectra B, Zafira
- Read eeprom of the instrument Panel Cluster of Astra G, Corsa C, Meriva, Tigra B
Odometer correction
- Odometer correction - Insignia, Astra J, Chevrolete Cruze by OBDII
- Odometer correction - Movano B - Instrument Panel by OBDII
- Odometer correction in EDC16 - 1.7;1.9 by OBDII
- Odometer correction ANTARA - EDC16 by OBDII
- Odometer correction in ECU - Bosch ME7.6.2, Delco MT35E
- Odometer correction PSG16 (Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C
- Instrument Panel Cluster - Astra G; Corsa-C; Meriva; Tigra-B; Vectra-B. NOT SUPPORT TRW IPC!
Engine Flasher
- Read/Write flash memory from ECU - Simtec 70, Simtec 71, Delco HDRC, Marelli MJD 602, Motronic 7.6, Delco MT35E
Radio
- Read radio code by OBD from Delco CDR500
Airbag
- Erase crash data by OBD - Airbag SAB6 - Siemens with MCU Motorola HC11
Dump Tool
- Airbag TEMIC Astra G, Corsa C (68HC908AZ32) - clear crash data
- SIEMENS (68HC11E9) GM 24416701 DJ - clear crash data
- Read immobilizer II (TMS) security code from dump
- Bosch EDC16 odometer correction
- Magneti Marelli odometer correction
- Astra G, Astra H, Corsa D instrument panel odometer correction

Advanced functions:

Security access
Custom request - manually transmission of messages to a unit (KWP82/KWP2000/CAN)
Custom query:
- read memory by address - possibility to read/program memory of electronic control units
- scanning of a unit memory space - automatically discover of all accessible memory

Supported vehicles:

Astra J - 2010+
Insignia - 2008+ (updated supported units)
Agila - 2000-2007 year
Astra F - 1992-2001 year
Astra G - 1998-2009 yer
Astra H - 2004+
Tigra - 1995-2000 year
Tigra B - 2004+
Vectra B - 1996-2001 year
Vectra C/Signum - 2002+
Corsa B - 1993-2001 year
Corsa C - 2001-2008 year
Codsa D - 2007+
Meriva - 2003-2008 year
Zafira - 1999-2005 year
Zafira B - 2005+
Omega B - 1996-2003 year
Frontera - 1997-1998 year
Frontera B - 1999-2004 year
Calibra - 1990-1997 year
Vivaro - 2001+
Movano - 2004+

Prices of the special functions:

ON007 - Compatibility AVDI with Tech2Win (Dealer level diagnostic) free
ON008 - Read security code + Key learning 960 euro
ON009 - Mileage recalibration - Instrument cluster,ECU,Airbag - clear CRASH data, Radio - reading PIN code- 197 euro
ON010 - Engine Flasher - 197 euro
ON011 - Advanced key programming/ASTRA J, INSIGNIA, Chevrolet CRUZE/ - 480 euro
ON012 - Mileage recalibration 2-Insignia, Astra J, Chevrolet Cruze by OBDII - 288 euro

FULL - all special functions - 2122 euro

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Peugeot / Citroen

COMMANDER FOR PSA

peugeot logo

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 ....

Commander for PSA is a PC - Windows based diagnostic software for Peugeot and Citroen vehicles. Target of our diagnostic software is to provide users all functions of the dealer's equipment plus special features unusual for remaining diagnostic tools.

Functions included in the base package (AVDI interface)

Identification (VIN, Part Number ,production data, producer, manufacturing date ,etc...)
Read and clear diagnostic trouble codes
Clear DTC explanation
Live data display (actual data)
Electronic control unit configuration
Read and Program Engine Control Unit flash memory for tuning purposes by OBDII
Dump Tool - many functions like clear crash data,etc ..

Special functions:

1.PIN code reading by OBDII ( CAN bus)

2.Mileage recalibration by OBDII in BSI module (CAN bus), Instrument cluster ( CAN ), C5, C2

3.Key programming

4.Read/Write eeprom from EDC15

5.Read/Write flash from EDC16

6.Read/Change Service list

7.Immobilizer Enable/Disable (EDC15)

8.Siemens SID80x series (SID801/SID801A/SID803/SID804/SID806) - Flash/Eeprom read/write, Edit service list, Read/change PIN code, Do after sales by

- Peugeot - 206, 306, 307, 406, Partner, Ranch - 2.0 hdi

- Citroen - Berlingo, C5, Picasso, Xantia, Xsara, Xsara Picasso - 2.0 hdi

- Peugeot - 206, 1007 - 1.4 hdi

- Citroen - C2, C3, Saxo - 1.4 hdi

Supported Vehicles for PIN code reading:

Peugeot 206 (1,4 HDI, 2.0 HDI)*check the footnote
Peugeot 207
Peugeot 306 (2.0 HDI)* check the footnote
Peugeot 307 (2.0 HDI)* check the footnote
Peugeot 307 2005+
Peugeot 308
Peugeot 3008
Peugeot 5008
Peugeot 508
Peugeot 406 (2.0 HDI)* check the footnote
Peugeot 407
Peugeot Expert II
Peugeot 607 2006+
Peugeot 807 2006+
Peugeot 1007 (1.4 HDI)* check the footnote
Peugeot Partner (2.0 HDI)* check the footnote
Peugeot Partner 2008+
Peugeot Ranch (2.0 HDI)* check the footnote
Citroen C2
Citroen C3 (1.4 HDI)* check the footnote
Citroen C3 II 2006+
Citroen DS3
Citroen DS4
Citroen DS5
Citroen C4
Citroen C4 II
Citroen C4 Picasso
Citroen C4 2011+
Citroen C5 (2.0 HDI)* check the footnote
Citroen C5 2004+
Citroen C5 II 2007+
Citroen C6
Citroen C8 2007+
Citroen Picasso (2.0 HDI)* check the footnote
Citroen Xantia (2.0 HDI)* check the footnote
Citroen Xsara (2.0 HDI)* check the footnote
Citroen Xsara Picasso (2.0 HDI)* check the footnote
Citroen Saxo (1.4 HDI)* check the footnote
Citroen Berlingo (2.0 HDI)* check the footnote
Citroen Berlingo 2008+
Lancia Phedra 2008+
Peugeot 208 2012+
Peugeot 2008 2013+
Peugeot 301 2012+
Citroen C-Elysee 2012+

footnote : * Need to have special fucntion PN008

Supported Vehicles for Mileage recalibration:

Peugeot 1007
Peugeot 207
Peugeot 307 2005+
Peugeot 308
Peugeot 3008
Peugeot 5008
Peugeot 508
Peugeot 407
Peugeot 607 2006+
Peugeot 807 2006+
Peugeot Partner 2008+
Citroen C2
Citroen C3 II
Citroen DS3
Citroen C4
Citroen C4 Picasso
Citroen C4 II
Citroen C5 II 2007+
Citroen C6
Citroen C8 2007+
Citroen Berlingo 2008+
Lancia Phedra 2008+
Peugeot 208 2012+
Peugeot 2008 2013+
Peugeot 301 2012+
Citroen C-Elysee 2012+
Peugeot Expert II
Citroen C5 2004+
Citroen C3 2006+
Citroen DS4
Citroen DS5
Citroen Jumpy II

Prices of the special functions:

PN009 - Engine Control Unit Advanced Diagnostic
Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16.Service list update.385euro
PN012 - PIN ManagerDisplay PIN code – diagnostic access. - 1345 euro
PN013 - BSI, Instrument Cluster Data Manager
Update of Instrument Cluster and BSI working data. -- 1345 euro

FULL - all special functions - 3075 euro

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

PEUGEOT / CITROEN DEVICE BY OBD II

NO PIN CODE NEEDED /NO PC NEEDED

ONLY OUR PEUGEOT CITROEN DEVICE CAN LEARN KEYS LESS THAN 2 MINUTES FOR ALL BSI TYPES
SIEMENS, JC AND VALEO BY OBD II

CAR LIST FOR PEUGEOT AND CITROEN

Peugeot 206 (1,4 HDI, 2.0 HDI)
Peugeot 207
Peugeot 306 (2.0 HDI)
Peugeot 307 (2.0 HDI)
Peugeot 307 2005+
Peugeot 308
Peugeot 406 (2.0 HDI)
Peugeot 407
Peugeot 607 2006+
Peugeot 807 2006+
Peugeot 1007 (1.4 HDI)
Peugeot Partner (2.0 HDI)
Peugeot Partner 2008+
Peugeot Ranch (2.0 HDI)
Citroen C2
Citroen C3 (1.4 HDI)
Citroen C3 II 2005+
Citroen Pluriel 2007+
Citroen Jumpy 2008+
Citroen DS3
Citroen C4
Citroen C4 Picasso
Citroen C5 (2.0 HDI)
Citroen C5 II 2007+
Citroen C6
Citroen C8 2007+
Citroen Picasso (2.0 HDI)
Citroen Xantia (2.0 HDI)
Citroen Xsara (2.0 HDI)
Citroen Xsara Picasso (2.0 HDI)
Citroen Saxo (1.4 HDI)
Citroen Berlingo (2.0 HDI)
Citroen Berlingo 2008+

NEW UPDATE FOR PEUGEOT / CITROEN KEY LEARINING DEVICE BY OBD COVERING DS3 DS4

http://www.youtube.com/watch?v=_AqbWGxd30U&;feature=relmfu

Renault / Volvo

COMMANDER FOR RENAULT 5.3

The Commander for Renault is a professional software mainly for programming the new key/card of Renault vehicles.

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI

ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT

PIN code not needed

Functions:

Connecting with all electronic control modules in the vehicle. Working by K and CAN bus diagnostic connection.
For all electronic control units reading identification data
For all electronic control units read and clear error (DTCs)
For all electronic control units live data (measured values)
For all electronic control units coding/configuration
For all electronic control units actuator tests
Airbag crash data clear Dacia Logan/Duster by OBDII
Program ID in UCH module
Mileage recalibration in Instrument cluster - Laguna III, Megane III, Fluence, Master III, Scenic III, Scenic/Modus (2003-2004), Clio II, Kango by OBDII
Odometer correction for Renault Clio/Kango/Meganne with HC908 JAEGER
Key programming function / pin code reading :

- Megane II X84 2003-2006
- Renault Megane II Ph2 X84 2007+
- Renault Megane III X95 2009+
- Renault Scenic II X64 2003+
- Renault Scenic II Ph2 X64 2007+
- Renault Scenic III X95 2009+
- Renault Laguna II X56 2000-2005
- Renault Laguna II Ph2 X74 2005-2007
- Renault Laguna III X91 2007+
- Renault Valsatis X73 2002+
- Renault Valsatis Ph2 X73 2006+
- Renault Espace IV X81 2003-2006
- Renault Espace IV Ph2 X81 2006+
- Renault Master Ph2 X70 2002-2006
- Renault Master Ph3 X70 2007+
- Renault Traffic II X83 2002-2006
- Renault Traffic II Ph2 X83 2007+
- Renault Kango MUX Ph2 X76 2002-2007
- Renault Kango X61 2008+
- Renault Clio II Ph2/3 X65 2002-2006
- Renault Clio Symbol
- Renault Clio Symbol 2010+ (BCM JC)* (check the footnote)
- Renault Clio Thalia
- Renault Clio Campus
- Renault Clio Sedan
- Renault Clio Classic
- Renault Clio III 2005+
- Renault Clio III with key card
- Renault Modus 2004+
- Renault Grand Modus 2008+
- Renault Master III X62 2010+
- Dacia Duster 2010+ (BCM JC) * (check the footnote )
- Dacia Logan X90 2004-2008
- Dacia Logan Ph2 X90 2008+
- Dacia Logan 2010+ (BCM JC) * (check the footnote)
- Dacia Sandero B90 2008+
- Dacia Sandero 2010+ (BCM JC) * (check the footnote )
- Dacia Solenza 2003-2005
- Renault-Samsung SM3 2006+
- Renault-Samsung QM5
- Renault-Samsung SM3
- Renault-Samsung SM5
- Renault Fluence 2009+ * (check the footnote )
- Renault Fluence (BCM immobilzier) 2009+
- Renault Twingo Ph2 X06 2002-2007
- Renault Twingo II X44 2007+
- Opel Vivaro 2002-2006
- Opel Vivaro Ph2 2007+
- Opel Movano Ph2 2002-2006
- Opel Movano Ph3 2007+
- Opel Movano B 2010+
- Nissan Primestar Ph2 2002-2006
- Nissan Primestar Ph3 2007+
- Nissan Platina 2002-2008
- Renault Latitude
- Renault Koleos

Prices of the special functions:
RR004 - Odometer correction - - 192 euro

RR006 - Key learning - 1056 euro

FULL - all special functions - 1248 euro

Footnote ; * Programmer is also needed - ZN001 - TAG programmer 480 euro

Renault Key Programmer by OBD V2.5&V2.6

NO PIN CODE NEEDED / NO PC NEEDED

With Renault/Dacia/Opel/Nissan K-Line + CAN Key/Card Programming Device (Version 2.5) you will be able to program new keys or cards for Renault based vehicles via OBD-II socket which are
using Philips Cryto II(known as Hi Tag 2, ID46, PCF7936) transponder. Device is able to recognize type of the car automatically. There is no need to choose anything.
No more need of Immobilizer pin code as the device will read the pin code from the Immobilizer and will enter it directly.

Models covered:
- Megane II X84 2003-2006
- Renault Megane II Ph2 X84 2007+
- Renault Megane III X95 2009+
- Renault Scenic II X64 2003+
- Renault Scenic II Ph2 X64 2007+
- Renault Scenic III X95 2009+
- Renault Laguna II X56 2000-2005
- Renault Laguna II Ph2 X74 2005-2007
- Renault Laguna III X91 2007+
- Renault Valsatis X73 2002+
- Renault Valsatis Ph2 X73 2006+
- Renault Espace IV X81 2003-2006
- Renault Espace IV Ph2 X81 2006+
- Renault Master Ph2 X70 2002-2006
- Renault Master Ph3 X70 2007+
- Renault Traffic II X83 2002-2006
- Renault Traffic II Ph2 X83 2007+
- Renault Kango MUX Ph2 X76 2002-2007
- Renault Kango X61 2008+
- Renault Clio II Ph2/3 X65 2002-2006
- Renault Clio Symbol
- Renault Clio Thalia
- Renault Clio Campus
- Renault Clio Sedan
- Renault Clio Classic
- Renault Clio III 2005+
- Renault Clio III with key card
- Renault Modus 2004+
- Renault Grand Modus 2008+
- Renault Master III X62 2010+
- Dacia Duster 2010+ *
- Dacia Logan X90 2004-2008
- Dacia Logan Ph2 X90 2008+
- Dacia Sandero B90 2008+
- Dacia Solenza 2003-2005
- Renault-Samsung SM3 2006+
- Renault-Samsung QM5
- Renault-Samsung SM3
- Renault-Samsung SM5

- Renault Fluence 2009+ *
- Renault Fluence (BCM immobilzier) 2009+
- Renault Twingo Ph2 X06 2002-2007

- Renault Twingo II X44 2007+
- Opel Vivaro 2002-2006
- Opel Vivaro Ph2 2007+
- Opel Movano Ph2 2002-2006
- Opel Movano Ph3 2007+
- Opel Movano B 2010+
- Nissan Primestar Ph2 2002-2006
- Nissan Primestar Ph3 2007+
- Nissan Platina 2002-2008
- Renault Latitude
- Renault Koleo

-Dacia Duster needs V2.6

-Dacia Logan needs V2.6

- Dacia Sandero need V2.6

- Clio Symbol needs V2.6

2010+ year with Johnson Control BCM module this is new models that need TAG programmer with device

YOU CAN LEARN OR ADD MANY KEY / CARD TO THE CAR NOT ONLY ONE

AND THE ORIGINAL KEY/CARD REMAINS ACTIVE

COMMANDER FOR VOLVO 4.1

Commander for VOLVO is software for diagnostic of VOLVO vehicles over CAN bus.

Full compatibility with VOLVO VIDA - DICE interface. Not only reprogramming. With AVDI are available full diagnostic options

Standard diagnostic functions:

For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
Device scan
Data Display / Measured values

Special functions:

Mileage recalibration by OBDII in instrument cluster and CEM module - S40, V40, V50, S60, S80, V70, S80, XC60, XC80, XC90

Read/program internal EEPROM of the instrument cluster by OBDII - S40, V40, V50, S60, S80, V70, S80, XC60, XC80, XC90

Prices of the special functions:

VL002 - Odometer correction - 480 euro

FULL - all special functions - 480 euro

Note: Ordering of a special functions is possible only if you have our diagnostic interface AVDI

TOYOTA CAR LIST

TOYOTA CAR LIST.pdf

Toyota / Lexus

COMMANDER FOR TOYOTA / LEXUS / SCION VEHICLES V5.0

ALL OTHER COMMANDERS SOFTWARE CAN BE ADDED TO THE SAME AVDI

ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1.......

Full compatibility Toyota/Lexus/Scion OEM diagnostic software

Toyota/Lexus/Scion Commander is a professional software for diagnostic of Toyota/Lexus/Scion vehicles. It allows you to perform complete diagnostics of all 1995-present Toyota/Lexus/Scion models. It provides some unique functions, which are not supported by any other diagnostic tool.

Standard diagnostic functions:
*Read fault codes
*Clear fault codes
*Device scan
*Display of Actual Values
*Actuator Tests
*Custom Read/Write

Special functions:

Key Programming
- provides ability for reset of immobilizer or smart system of the vehicle, registration of keys and remotes
Transponder tool
- programming key by dump of smart system/immobilizer, identification of transponders, cloning of ID67,ID68,ID70 and Texas fixed transponders, ability for preparation of ID67, ID68, ID70
Dump tool
- wide range of options for resetting (renew) of different units (immobilizers, smart systems, engine control modules, instrument clusters) by memory dump. Supported are also latest immobilizers with encrypted memory
ID-box reset by LIN connection
ECU flasher - available for EDC15, EDC16 engine control modules
* Extended support of control units covered by functions Live Data, Active Tests, Coding
* Extended supported immobilizer systems covered by "Key Programming" and "Key by Dump" functions - free for all owners of TN002

Prices of the special functions:
*TN002 - Key Programming, Transponder Tool, ID-box reset - 312 euro
*TN003 - Read/Write flash memory EDC16 - Free
*FULL - all special functions - 312 euro

TOYOTA CAR LIST.pdf

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Chrysler / Dodge / Jeep

COMMANDER FOR CHRYSLER/ DODGE/ JEEP V2.6

Commander Tool for Crysler, Dodge and Jeep is a software developed for learning of keys and Mileage Recalibration of these vehicles. Basic diagnostics of all control units, including, but not limited to Engine, Instrument Panel Cluster, Skim, Electronic Transmission Control. Pin code extraction from SKIM dump for older vehicles.

Standard diagnostic functions:

Connect to the devices using KWP2000 and UDS over ISO transport protocol (CAN)
For all electronic control units reading identification and extended identification information
For all electronic control units read errors (DTCs)
For all electronic control units clear errors (DTCs)
Output tests
Control unit adaptations - Seatbelt Warning Enable/Disable, Change mileage display between miles and kilometers and so on
Actual values display
Scan all units
Clear all DTCs

The key learning function works by CAN and J1850. see below the list of supported vehicles. In the next versions we will add more vehicles to this list FREE for all customers who owns the key learning function. Since version 2.3 we have added support for J1850 vehicles. Owners of the Chrysler Key Learning special function can read and write the FULL EEPROM of the Immobilizer control unit.

ALL OTHER COMMANDERS SOFTWARE CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARE LIKE STAR DIAGNOSE /GT1 ....

Supported Vehicles for key learning by OBDII:

Chrysler 300 (2006)
Chrysler 300 (2007)
Chrysler 300 (2010)
Chrysler 300 (2011+) proximity keys
Chrysler 300C (2005-2008)
Chrysler 300C (2011+) proximity keys
Chrysler 300M (-2007)- Requires J1850 Adaptor
Chrysler 300M (2007)
Chrysler Aspen (2007-2009)
Chrysler PT Cruiser (-2006)- Requires J1850 Adaptor
Chrysler PT Cruiser (2006-2010)
Chrysler Sebring Convertible (2008)
Chrysler Sebring (2003-2006)- Requires J1850 Adaptor
Chrysler Sebring (2007-2008)
Chrysler Neon- Requires J1850 Adaptor
Dodge Avenger (2007-2011)
Dodge Caliber (2007-2011)
Dodge Caravan (-2007)- Requires J1850 Adaptor
Dodge Caravan (2007-2010)
Dodge Challenger (2008-2010)
Dodge Challenger (2011+) proximity keys
Dodge Charger (2006-2010)
Dodge Charger (2011+) proximity keys
Dodge Dakota (2005-2011)
Dodge Durango Adv./SLT (2005)
Dodge Durango (2001-2003)- Requires J1850 Adaptor
Dodge Durango (2004-2009)
Dodge Durango (2011+) proximity keys
Dodge Grand Caravan Sport- Requires J1850 Adaptor
Dodge Grand Caravan (2008-2009)
Dodge Intrepid- Requires J1850 Adaptor
Dodge Journey (2009-2011)
Dodge Journey (2011+) proximity keys
Dodge Magnum (2005)
Dodge Magnum (2007)
Dodge Neon (2005)
Dodge Nitro (2007-2011)
Dodge Pichup- Requires J1850 Adaptor
Dodge RAM (-2006)- Requires J1850 Adaptor
Dodge RAM 1500 (2006-2011)
Dodge RAM 2500 (2006-2011)
Dodge RAM 3500 (2006-2011)
Dodge RAM (2007-2011)
Dodge Ram (2011+) proximity keys
Dodge Stratus- Requires J1850 Adaptor
Jeep Commander (2006-2010)
Jeep Grand Cherokee (2001-2005)- Requires J1850 Adaptor
Jeep Grand Cherokee (2005-2011)
Jeep Grand Cherokee (2011+) proximity keys
Jeep Liberty (-2007)- Requires J1850 Adaptor
Jeep Liberty (2008-2011)
Jeep Compass (2007-2010)
Jeep Patriot (2007-2011)
Jeep Laredo (2007-2011)
Jeep Wrangler Rubicon (-2007)- Requires J1850 Adaptor
Jeep Wrangler (2007-2011)
Plymouth Neon Highline (2001-2005)- Requires J1850 Adaptor
Volkswagen Routan (2009-2012)

Owners of the Chrysler Mileage Recalibration special function can read and write the FULL EEPROM of the Instrument Cluster control unit.

Supported Vehicles for Mileage Recalibration by OBDII:

Dodge Avenger 2007+
Dodge Avenger (2011+)
Dodge Caravan 2007+
Dodge Caliber 2007+
Dodge Charger 2007+
Dodge Dakota (2004-2006)
Dodge Durango (2004-2006)
Dodge Durango 2007+
Dodge Durango (2011+)
Dodge Grand Caravan (2011+)
Dodge Magnum
Dodge RAM (2001 - 2006)- Requires J1850 Adaptor
Dodge RAM (2006 – 2012)
Dodge Nitro
Dodge Journey
Dodge Journey (2011+)
Chrysler 300C 2004+
Chrysler 300C (2011+)
Chrysler 300M - Requires J1850 Adaptor
Chrysler Aspen (2007)
Chrysler Pacifica (2007)
Chrysler PT Cruiser (2002-2006) - Requires J1850 Adaptor
Chrysler PT Cruiser (2006 +)
Chrysler Voyager (-2007) - Requires J1850 Adaptor
Chrysler Voyager 2007+
Chrysler Town and Country (2007-2010)
Jeep Commander 2005+
Jeep Grand Cherokee (2002-2004) - Requires J1850 Adaptor
Jeep Grand Cherokee 2005+
Jeep Cherokee (2002-2006) - Requires J1850 Adaptor
Jeep Cherokee (2007-2011)
Jeep Cherokee (2011+)
Jeep Liberty (2007-2010)
Jeep Patriot (2007-2012)
Jeep Compass (2007-2009)
Jeep Wrangler (2007-2012)
Jeep Laredo (2007-2011)
Neon (1998-2005) - Requires J1850 Adaptor
Volkswagen Routan (2009-2012)
Mileage recalibration in Engine Control Unit SRI-3
Mileage recalibration in Engine Control Unit SRI-4
Mileage recalibration in Engine Control Unit SRI-5 (2006-2011)
Mileage recalibration in Engine Control Units (SRI) all versions (2011+)
PCM - EDC15C2 (2000-2005)
Chrysler Crossfire (1999 with VDO dash)

The special function Engine Control Unit Flasher can be used to read and write the Flash of Engine Control Units (also known as Power Control Modules). For EDC15C2 Diesel Engine Control Units the software also supports reading the writing the complete EEPROM. Supported Engine Control Units

Prices of the special functions:

CR002 - Key learning - 480 euro
CR003 - Mileage Recalibration - 480 euro
CR004 - ECU - 159 euro

FULL - all special functions - 1119 euro

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Ford / Nissan / Mitsubishi

COMMANDER FOR FORD V4.7

The Commander for Ford is a software intended for diagnostic of FORD vehicles over CAN bus. It provides abilities for IN code calculations, key programming and mileage recalibration.

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 ....

Standard diagnostic functions:

For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
Device scan
Data Display / Measured values

Special functions:

INCODE calculator for FORD, MAZDA, JAGUAR, LAND ROVER, MERCURY, LINCOLN

Ford Focus; C-MAX; S-MAX; Fusion; Mondeo; Kuga; Galaxy; Transit; Tourneo Conect; Ka; Fiesta; Taurus; Crown Victoria; Thunderbird; ZX2; Mustang; GT; Edge; Escape; Explorer; Expedition; Ranger; Super Duty; Freestar
Mazda 2/Demio; Mazda3/Axela; Mazda5/Premacy; Mazda6/Atenza; Mazda8/MPV; CX-7; CX-9; Biante; Carol; AZ-Wagon; AZ-Offroad; Spiano/Scrum Vagon; Verisa; MX-5; Biante; Tribute
Mercury Grand Marquis; Mariner; Sable; Milan; Mountaineer; Marauder; Montego; Monterey
Lincoln Zephyr/MKZ; LS; Town Car; MKS; Aviator; Mark LT; MKT; Navigator; MKX; Blackwood
Land Rover Discovery; Range Rover Defender; Freelander; Range Rover Sport
Jaguar X-Type; XK/XKR; S-Type; XF/XFR; XJ8/XJR

KEY LEARNING BY OBDII , IN/OUT CODES NOT NEEDED

Focus II 2004
Transit Connect 2007+
Transit 2006+
Tourneo Connect
Mondeo IV 2007+
Fiesta V (CAN)
Fiesta VI 2008+
KA 2002-2008 (CAN)
Galaxy III 2006+
C-MAX
Fusion
S-MAX
Kuga
Mazda 2 2006+
Mazda 3 2006+
Mazda 6 2006+
Explorer, Expedition, Ranger, Mariner, Mountaineer, F150, Fx50, Ex50 - 2005-2009
Escape 2006-2011
Edge, Flex 2006-2010
Lincoln - MKS, MKX,MKT.MKZ 2006-2010

Mileage recalibration by OBDII

Ford Focus II 2004+
Transit Connect 2007+
Tourneo Connect
Mondeo IV High Line 2007+
Fiesta (CAN)
Galaxy III 2006+
C-MAX
Fusion
S-MAX
Kuga
Crown Victoria 2006+
Escape 2006+
Flex 2006+
E150-E350 2006+
F150-F350 2006+
Freestar 2006+
Freestyle 2006+
Mustang 2006+
Edge
Focus USA 2005+
Fiesta USA 2010+
Explorer 2004+
Expedition 2004+
Ranger 2004+
Grand Marquis 2006+
Town Car 2005+
F150 2005+
Fx50 2005+
Ex50 2005+
Flex 2007+
Edge 2007+
Fusion USA 2006+

Prices of the special functions:
FR002 - InCode calculator + Key learning - 480 euro
FR003 - Odometer correction - 317 euro

FULL - all special functions - 634 euro

P.S : Ordering for special functions is possible only if you have our diagnostic interface AVDI

COMMANDER FOR NISSAN V 4.1

Commander for Nissan is software intended for learning of keys of vehicles Nissan.

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 ....

Supported Immobilizer systems:

Immobilizer NATS-2 Siemens - 5WK4593, 5WK4640, 5WK46472, 5WK4825, 5WK48642.
NISSAN MICRA (K11) 1997 year
NISSAN Primera W/P10 1991-1996 year
NISSAN Maxima QX (A32) Schalter V 6 2,0ltr - 1995-2000 year
Immobilizer NATS-4 Siemens - 5WK4738, 5WK4750, 5WK4803, 5WK48543A, 5WK48543B, 5WK48692.
Extracting Immo Software Version, Read/Write eeprom from immo, Read Key Code, ADD Key, Delete Specific Key, Delete All Keys.
NISSAN Micra 1998-2000 year
NISSAN Primera 2000-2003 year
NISSAN Almera 1998-2000 year
Immobilizer NATS-5,NATS 5+ Siemens - 5WK48041, 5WK48042, 5WK48042, 5WK48643, 5WK48643, 5WK48644,
5WK48644, 5WK48644.
Extracting Immo Software Version, Read/Write eeprom from immo, Read PIN Code, Check Key Status, ADD Key, Delete All Keys.
NISSAN Altima 2001-2004 year
NISSAN Altima 2005 year
NISSAN Armada 2004-2005 year
INFINITI FX35/FX45 2004-2005 year
INFINITI G20 2000-2002 year
INFINITI G35 2003-2005 year
INFINITI I30, I35 2000-2004 year
INFINITI M45 2003-2005 year
NISSAN Maxima 2000-2005 year
NISSAN Murano 2003-2005 year
NISSAN Pathfinder 2001-2005 year
NISSAN Quest 2004-2005 year
INFINITI QX4 2001-2004 year
INFINITI Q45 2002-2004 year
NISSAN Sentra 2000-2004 year
NISSAN Titan 2004-2005 year
NISSAN 350Z 2003-2005 year
NISSAN Primera 2003 year
Nissan Micra 2007+ *(check the footnote)
Nissan Note 2006+ *(check the footnote)
Nissan Tiida 2007+ * (check the footnote)
Nissan Platina 2006+
Nissan Kubistar 2007+
Nissan Sunny 2006+
Nissan Almera Classic 2006+
Nissan Primestar/Interstar 2002-2006
Nissan Primestar/Interstar 2007+

PIN Code CALCULATOR FOR ALL NEW BCM MODULES FOR INFINITY AND NISSAN CARS 2007-2012 FOR NORTH AMERICA, SOUTHAMERICA, ASIA, AUSTRALIA,MIDDLE EAST , BCM MODULES 5 DIGITS TO PIN 4 DIGITS (EXAMPLE 12B3A=NEW CODE 4854/OLD CODE 3934)
WORKS FOR THESE CARS - ALTIMA SEDAN, ALTIMA COUPE, VERSA HATCHBACK, VERSA SEDAN,
CUBE, SENTRA, NISSAN LEAFT, MAXIMA, Z, Z ROADSTER, GTR, JUKE, ROUGE, MURANO, MURANO CROSS CABRIOLET XTERRA, PATHFINDER, ARMADA, QUEST, FRONTIER, TITAN, 370Z, XTRAIL, TIIDA, FRONTIER, MARCH,CIMA,FUGA,SKYLINE, LATIO,NEW TEANA, NEW SUNNY, PATROL, QASHQAI, DUALIS, FRONTIER, NAVARA, LIVINA, GRAND LIVINA, BLUEBIRD,G SEDAN, G COUPE, G CONVERTIBLE, INFINITY M, INFINITY EX, INFINITY EX, INFINITY FX, INFINITY JX, INFINITY QX

Prices of the special functions:

NN003 - Key learning - 399 euro

NN004 - PIN Code Calculator new BCM 2007-2012 - 480 euro

FULL - all special functions - 879 euro

Note: Ordering for special functions is possible only if you have our diagnostic interface AVDI

Footnote : * Programmer is also needed - ZN001 - TAG programmer 480 euro

COMMANDER FOR MITSUBISHI 1.6

Commander for Mitsubishi is a software intended for diagnostic and key programming for Mitsubishi vehicles.

Standard diagnostic functions:

For all electronic control units reading identification data
For all electronic control units read/clear fault codes (DTCs)
DTCs description is available in different languages - Czech, English, Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Polish, Russian, Spanish, Turkish
Device scan
Data Display / Measured values
Coding/Adaptations
Output tests
Read/Program flash Engine Control Units
Output tests

Special Functions ;

Key programming
Dump tool

The key programming function currently works by CAN. check below the supported vehicles. In the next versions we will add more vehicles to this list FREE for all customers who owns the key learning function. We also plan to support vehicles with K-Line interface.
Keys can be programmed when the pin code of the vehicle is known. The Mitsubishi Commander has a database of default pin codes. The pin code can be changed with the Mitsubishi Commander. If the pin code is changed - next time when a key is programmed the new pin code should be entered.

The Mitsubishi commander software supports all CAN vehicles for key programming by OBDII

L200 (2006-2011)
L200 Hunter (2011+)
Hunter (2007-2011)
Pajero (2006-2011)
Grandis (2006-2011)
Shogun (2006-2011)
Montero (2006-2011)
Eclipse (2006-2011)
Galant (2006-2011
Endeavor (2006-2011)
Lancer (2007-2011)
Lancer Evolution (2008-2011)
Outlander (2007-2011)
Colt (2006-2011)
Raider
ASX
Triton

The Dump Tool special function can be used to

Modify odometer in EEPROM dump from dashboard
Clear Crash Data from Airbag

Prices of the special functions:

MI003 - EDC15 ECU - R/W eeprom and flash memory - 139 euro
MI004 - Key learning Advanced - 399 euro

FULL VERSION - all special functions - 557 euro

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Ford Key Programmer device by OBDII

NO PIN CODE NEEDED/NO PC NEEDED

Ford key programmer designed to program additional key into new Ford vehicles, even if you have all keys lost.

You can start your car or add new keys in few seconds by OBD .NO LAPTOP NEEDED !

Supported CAN based models from 2004

Models covered:
*Focus C170*, C170_SA, C307, C307_SA, C307_AP
*C-MAX C214
*Fiesta B256*, B376_AP
*Fiesta S.A. BV256*
*Fiesta B299 (2008y+)
*Ikon B376_AP*
*Fusion CD338, B226*
*Fusion B232 (2008y+)
*Galaxy/S-Max CD340
*Mondeo CD345
*Transit TRANSIT (2006y+)
*Transit Connect V227
*Tourneo Connect V227
*Mazda 3 MAZDA_3 (2006y+)
*Mazda 6 J61 (2006y+)
*Mazda CX-7 J31 (2006y+)

KeyLess Go models:

*Fiesta B299 (2008y+)
*Fusion B232 (2008y+)
*Mondeo CD345 (2007y+)
*Galaxy/S-Max CD340 (2008y+)

Fiat / Lancia / Alfa

Commander for Fiat/Lancia and Alfa 2.7

Commander for Fiat/Lancia/Alfa is software designed for odometer correction, key programming of Fiat vehicles.

Standard diagnostic functions :

In this version of the software have been added several units. You can connect with them to Read and Clear DTC's.

Special functions:

Odometer correction by OBDII in instrument cluster of CAN based vehicles:

Strada
Fiat 500
Alfa 147
ALfa 159
Lancia Y
Alfa Mito
Ford Ka
Idea
Punto
Grande Punto
Panda
Palio
Linea
Ducato 2006+
Fiorino
Albea
Croma 2006+
Doblo
Lancia Musa 2006+
Bravo 2005+
Stilo 2001+
Siena
Maserati Quattro porte 2005, 2006

Read/Write eeprom memory, Odometer correction by OBDII of Engine Control Unit - EDC15C5(EURO2), EDC15C7(EURO3). This model ECU has the following vehicles:
Alfa 145 - 1.9 JTD
Alfa 146 - 1.9 JTD
Alfa 147 - 1.9 JTD 16V ; 1.9 JTD 8V
Alfa 156 - 1.9 JTD ; 2.4 JTD
Alfa 166 - 2.4 JTD
Fiat Bravo - 1.9 JTD
Fiat Brava - 1.9 JTD
Fiat Doblo - 1.9 JTD
Fiat Ducato - 2.0 JTD ; 2.3 JTD ; 3.8 JTD
Fiat Marea - 1.9 JTD ; 2.4 JTD
Fiat Marengo - 1.9 JTD
Fiat Multipla - 1.9 JTD
Fiat Punto - 1.9 JTD
Fiat Palio - 1.9 JTD
Fiat Stilo - 1.9 JTD
Fiat Siena - 1.9 JTD
Fiat Scudo - 2.0 JTD
Lancia K - 1.9 JTD
Lancia Lybra - 1.9 JTD ; 2.4 JTD
Lancia Thesis - 2.4 JTD
Lancia Z - 1.9 JTD
Read/Write eeprom memory, Odometer correction, Make VIRGIN by OBDII of Engine Control Unit - Marelli Multijet MJD 6JF. This model ECU have the following vehicles:
Fiat new Panda - 1.3 IAW Multijet MJD 6JF
Fiat Idea - 1.3 IAW Multijet MJD 6JF
Fiat Doblo - 1.3 IAW Multijet MJD 6JF
Fiat Punto - 1.3 IAW Multijet MJD 6JF
Fiat Grande Punto - 1.3 IAW Multijet MJD 6JF
Fiat Cinquecento - 1.3 IAW Multijet MJD 6JF
Lancia Musa - 1.3 IAW Multijet MJD 6JF
Lancia Ypsilon - 1.3 IAW Multijet MJD 6JF
Read/Write Eeprom memory, Make VIRGIN by OBDII of Engine Control Unit - Marelli IAW 4AF/4EF/59F/5AF/5AM/5NF
Read/Write Flash memory by OBDII of Engine Control Unit - Marelli IAW 4AF/4EF/59F/5AF/5NF/6JF; BOSCH ME7.3H4/ME7.3.1/ME7.2.1 ( BOOT MODE )
MJD 6JF - IMMO OFF
Change odometer of Engine Control Unit - BOSCH EDC16 - Tested Version for now : Fiat Croma, Alfa 159, Fiat 16, New Fiat Bravo 1.6 JTD, New Lancia Delta 1.6 JTD, Alfa GTV 1.9 JTD
Transponder maker - Preparing transponder by dump of immobilizer to be ready for key programing.
Key learning - by OBDII key programming for variuos models Fiat, Alfa, Lancia - Alfa 147, Mito; Fiat 500, Bravo, Grande punto, Croma, Doblo, Ducato, Fiorino, Idea, Palio, Panda, Stilo; Lancia Thesis, Delta

Prices of the special functions:

FN003 - Odometer correction in ECU(EDC15C5+EDC15C7+MJD 6JF) by OBDII (R/W eeprom of ECU) -312 euro
FN004 - Read/Write Eeprom, Make VIRGIN of ECU/Marelli IAW 4AF/4EF/59F/5AF/5AM/5NF - 240 euro
FN005 - Read/Write Flash memory of ECU - Marelli IAW 4AF/4EF/59F/5AF - 197 euro
FN006 - Change odometer of ECU - BOSCH EDC16 - 197 euro
FN007 - Transponder maker - free for owners of ZN001 - TAG programmer and KT001 - TAG key tool *
FN008 - Key learning - 192 euro
FN009 - Mileage recalibration by OBDII (CAN bus) - 240 euro

FULL - all special functions - 1378 euro

*Programmer is also needed - ZN001 - TAG programmer

P.S: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Hyundai / Kia

Commander for Hyundai and KIA V1.7

Commander for Hyundai and KIA is a software intended for progamming keys and diagnosing of these vehicles. Basic diagnostics of control units over CAN and K-Line - Engine, Instrument Panel Cluster, Immobilizer, Airbag, Electronic Transmission Control...
Display and clear fault codes. Display of DTCs in the following languages: English, French, Spanish, German, Italian, Russian, Czech, Polish, Bulgairan, Chinese, Turkish, Greek, Hungarian.

Actuator tests - Fan speed actuation, lamps activation and so on.

The key learning function works only by K-Line and CAN. The Hyundai/KIA Immobiliser system consists of the SMARTRA ECU which has its own CPU which controls the vehicles immobiliser in conjunction with the engine management ECU. The key learning function in general works for all Hyundai/KIA vehicles manufactured since year 2000 until today. check below the supported vehicles on which the key learning function is guranteed to work. In the next versions we will add more vehicles to this list FREE for all customers who owns the key learning function.

Key Learning by CAN and K-Line for the following models by OBDII

KIA Morning
KIA New Morning
KIA Euro Start
KIA Naza Suria
KIA Naza Picanto
KIA Ceed
KIA Cerato
KIA Carens
KIA Soul
KIA Picanto
KIA Spectra
KIA Sephia
KIA Optima
KIA Magentis
KIA Rio
KIA Venga
KIA Forte
KIA Opirus
KIA Amanti
KIA Cadenza
KIA Sportage
KIA Sorento
KIA Mohave
KIA Borrego
KIA Rondo
KIA Carnival
KIA Sedona
KIA Visto

Hyundai Accent
Hyundai Verna
Hyundai Elantra
Hyundai Avante
Hyundai Sonata
Hyundai Grandeur
Hyundai H100
Hyundai H200
Hyundai SantaFe
Hyundai Veracruz
Hyundai Terracan
Hyundai Tucson
Hyundai Getz
Hyundai Atos
Dodge Atos
Hyundai Santo Xing
Hyundai i30
Hyundai i20
Hyundai i10
Hyundai i800
Hyundai Genesis
Hyundai Equus
Hyundai Porter
Hyundai Libero
Hyundai Entourage
Hyundai Coupe

Mileage Recalibration and Read/Write Full EEPROM of instrument cluster for the following models by OBDII:

KIA Ceed 2011+
KIA Magentis 2010+
KIA Optima 2010+
KIA Rio 2011+
KIA Soul 2011+
KIA Sportage 2011+
KIA Sorento 2011+
Hyundai Elantra 2011+
Hyundai I20 2011+
Hyundai Solaris 2011+
SaangYong Korando 2011+

Read/Write complete EEPROM and Flash of EDC15 Engine Control Units (which is also the Immobilizer control unit). Pin Code extraction by OBD and EEPROM dump
- Odometer correction by OBD in Engine Control Units EDC15
- Read/Write Flash and automatic flash checksum calculation of EDC16 Engine Control Units (which is also the Immobilizer control unit). Automatic Pin Code reading for EDC16
- Automatic Pin Code reading in vehicles equipped with KEFICO Engine Control Units with processor ST10F275.
- PIN by VIN calculator for vehicles up to year 09.2007

Prices of the special functions:

HK002 - Key learning by OBDII + PIN by VIN calculator- 192 euro
HK003 - Mileage recalibration in ECU (EDC15) and (R/W eeprom/flash of ECU) by OBDII- 159 euro
HK004 - Pin Code extraction from ECU - EDC16 and KEFICO + (R/W flash of EDC16) by OBDII-240 euro
HK005 - Mileage Recalibration and Read/Write Full EEPROM of instrument cluster by OBDII - 240 euro

FULL - all special functions - 831 euro

Note: Ordering of special functions is possible only if you have our diagnostic interface AVDI

Trans / IC Programmers

Transponder/key programmer - ZN001

This programmer works with AVDI interface. It also is compatible with our software Commander for VAG, BMW, Renault, Nissan, Mercedes, Fiat.

Supported transponders:
*Atmel TK5551 / T5
o Temic 11
o Temic 12
o Megamos 13 (fixed identifier)
o Megamos 48 (Megacrypt I)
o Megamos 8E (Megacrypt II)
o Texas TIRIS 4C
o Texas TIRIS 4D
o Philips PIT - 7930/7931/7935 (PIT)
o Philips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961
o Philips HITAG-Pro – 7937, 7938, 7939, 7952
o JMA – TPX1 (cloning of Texas 4C)
o JMA – TPX2 (cloning of Texas 4D/4E)
Next software update consists : Texas 4E.

PRICE : ZN001 - TAG programmer - 480 euro

ZN030 -ABPROG

ZN030-ABPROG - This programmer works together with AVDI interface.- 288 euro

With the help of this programmer you can :

- Read the SSID of the key, Erase the NEC chip and then program it again

With adapter ZN031* for M35xxx/SPI/I2C Adapter together with Abrites EEPROM Programmer software allows you to erase and write SPI EEPROM memory with and without incremental registers:

M35080VP
M35080V6
D080D0WQ
D160D0WQ
M95080
M95160
M95320
M95640
M95128

PRICE : ZN030 - ABPROG - 288 euro

Customers who already have ZN002 - NEC programmer - can only buy an adapter (ZN031) - the price for them will be 120 euro

TAG KEY TOOL 5.5

With this software you can program keys/transponders for vehicles, bikes or trucks from different brands that using Megamos 13, Megamos 48 (Megacrypt I), Megamos 8E (Megacrypt II), Texas 4C, Texas 4D, Temic 11, Temic 12, T5, TK5555, Philips PIT - 7930/7931/7935 (PIT), Philips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7953, 7961, Hitag-Pro 7937, 7938, 7939, 7952 , JMA TPX1 and TPX2

This software is compatiable with AN020 and ZN001 transponder programmers. Just need dump from your immobilizer, put your NEW KEY (or transponder) on the programmer and generate working key! You can also produce preprogrammed transponders for a different vehicles.

*Utility for programming of key by dump of CAS4 - latest BMW Fx series. NO OTHER TOOL WITH SIMILAR OPTION

* Free transponder production ID67,ID68,ID70,TP22,TP23,TP24 ... and many others

*Big amount of utilities for programming of key by dump of immobilizer ( Fiat, Toyota, Ford, BMW, Audi/VW Kessy, Mercedes, Jeep, .. )

*Easy cloning of transpoders - Megamos 13, Temic 11/12, Philips ID33

*Easy cloning of Toyota/Lexus/Scion Texas TIRIS 4D transponders onto TPX2 transponder

*Easy cloning of ALL TYPES Texas 4D transponders onto TPX2 transponder - required internet connection

*Easy cloning of ALL TYPES Texas 4C transponders onto TPX1 transponder

*Programming of used BMW keys 7943/7944

PRICE :

KT001 - TagKeyTool - Utility for programming of keys by dump of immo - 480 euro
KT005 - TagKeyTool - Utility for programming of TP22, TP23, TP24, TP25 from any Megamos 48 - free
KT006 - TagKeyTool - Key Maker for Passat B6/CC Keyless - 159 euro
KT007 - TagKeyTool - Key preparation by dump of CAS4 - 3840 euro

EXISTING OWNERS WHO HAVE BOUGHT AN020/ZN001 PROGRAMMERS BEFORE 20-SEP-2010 WILL RECIEVE FREE KT001

MEGAMOS CRYPTO 48 TRANSPONDERS

TA2, TA3, TA4 and TA5 transponders are based on the Megamos 48 Crypto transponders
and can be used with the VAG Commander together with the TAG programmer (ZN001) for preparation of dealer keys from them. These transponders are suitable for the latest 2008+ models.
It is also possible to produce TP22, TP23, TP24 and TP25 transponders from the corresponding TA2, TA3, TA4 and TA5 transponders.

No changes in the immobilizer/ECU are need.

*AUDI A3 - 2003+ (TA5 is used). The produced dealer key can be programmed then with standard key-learning procedure.

*AUDI A4 - 2003-2008 (TA5 is used). A4 from 2003 to 2008 are with BOSCH RB8 Instruments which require special key-learning procedure which is available in the VAG Commander.

*VW - 2005+ - For the models till 2008 (except Passat B6) it is needed only to have a TP23 transponder.
This transponder can be produced from the TA3 transponder with the VAG Commander.
For Passat B6 and remaining VW models 2008+ it is required to have a dealer key, which also is produced from the TA3 transponder with the VAG Commander.

*SEAT - 2005+ - For the models till 2008 it is needed only to have a TP22 transponder.
This transponder can be produced from TA2 transponder with the VAG Commander.For the remaining Seat models 2008+ it is required to have a dealer key, which also is produced from the TA2 transponder with the VAG Commander.

*SKODA - 2005+ - For the models till 2008 it is needed only to have a TP24 transponder.

This transponder can be produced from theTA4 transponder with the VAG Commander.
For the remaining Skoda models 2008+ it is required to have a dealer key, which also is produced from the TA4 transponder with the VAG Commander.

Prices:
TA2/TA3/TA4/TA5 transponders on price of 5 EURO

TP22/TP23/TP24/TP25 transponders on price of 5 EURO

UNIVERSAL MERCEDES TRANSPONDER FOR E / C AND G CLASS

This transponder is prepared to program directly to the car ,just insert the key into the ignition and the transponder will program itself immediately to start the car .
each transponder has its own number from 1 to 8 so you can program up to 8 keys to the same car .
price : 10 EURO

PCF 7935 & 7936 FOR BMW& MINI COOPER ARE AVAILABLE - 5 euro /pc

IC PROGRAMMER

NEC programmer for Mercedes IR keys

This programmer works together with AVDI interface. No need to disolder NEC mcu from the key. Enough is to solder few wires.

About data generation needed to be programmed in the key is useful to use Commander for Mercedes option MN005.

PRICE : ZN002 - NEC programmer - 240 euro

IC / MCU programmer - AN022

This programmer currently can be used together with your Commander for VAG to read and program Micronas MCU inside of instrument clusters from Volkswagen Audi Group vehicles.

Using 3rd party software it supports:

Read/Program EEPROM ICs - I2C, Mircrowire, SPI and other (M35080,...)
Read/Program EEPROM/FLASH memory of Motorola MCUs from the family HC05,HC08,HC11,HC12,HCS12,9S12,MPC5xx
Read/Program EEPROM/FLASH memory of Texas MCUs from the family TMS370,TMS374
Read/Program EEPROM/FLASH memory of ST MCUs from the family ST7,ST10
Read/Program EEPROM memory of National MCUs from the family CR16
Read/Program EEPROM/FLASH Atmega MCUs
Read/Program EEPROM/FLASH memory of ARM MCUs from the family Micronas CDC32xxG
Programmer can skip read protection security of the following MCUs - HC05B, HC05X, HC11EA9, HC11E9, HC12,HCS12,9S12

Programmer including some additional adapters : TMS MCUs, ARM JTAG, Mororola BDM, HC05..

PRICE : AN022 - IC/MCU programmer - 240 euro

SAE J2534 (PassThru) compliant driver for AVDI

Using this driver your AVDI interface will become compliant to SAE J2534-1
Connected through high speed USB 2.0 or Bluetooth it can be used to perform online diagnostics or ECU reprogramming of a wide range of vehicles. It can be used also like Vehicle Communication Interface with many 3rd party software like:

*Honda HDS
*Volvo VIDA (full diagnostic capabilities)
*Toyota/Lexus/Scion Techstream
*Mercedes Star Diagnose (only CAN Bus)
*Rover/Jaguar IDS
*Ford Scanner
*Chrysler J2534 Flash Application ... etc .....

Each SAE J2534 compliant interface can be used to access manufacturer’s reprogramming web site and to update software of electronic control units in the vehicle.

Current driver software version is 2.0

Supported bus protocols:

- CAN - GMLAN, ISO14229, ISO15765, J1939 - two CAN channel switchable single/dual wire
- KWP2000 (ISO9141, ISO14230)
- J1850, J2610 – under development

Other features:
- A/D input
- Switching CAN bus and K-line on different PINs

Click here to know more about J2534 and ECU reprogramming

Free software updates of the driver!

Driver is included in the package with AVDI interface.

CLICK HERE TO GET AN ONLINE ACCESS TO ECU REPROGRAMMING AND DIAGNOSTIC .SAE J2534 MANUFACTURERS ONLINE