Odometer correction for W168 A-Class W202 C-Class W140 S-Class W210 E-Class W461 G-Class W208 CLK W220 S-Class W163 ML.pdf

Odometer Correction for W221 and W216.pdf

Odometer W204 W212 W207 W218.pdf

Odometer W211 W219 X164 W164 W203 W251 W463 R171 W209.pdf

              COMMANDER FOR MERCEDES 

                            ADAPTATIONS 

With Mercedes Commander you can make various adaptations, for example the following screenshot shows Mercedes S-Class W221 ASSYST.

                  COMMANDER FOR MERCEDES

By using the SCAN ALL command you can explore all the devices that are available for diagnostics for the specified car.
From the options tab you can choose which protocol to be used for scanning and if you are not sure , you can check all
of the available from the list, but DO have in mind that the K-Line Slow Init should be used only for cars before 1998.

                                            MERCEDES COMMANDER 6.4  

The Mercedes Commander is a professional software for diagnostic of Mercedes-Benz vehicles.
It allows you to perform complete diagnostics for all 1995-present Mercedes-Benz models.
It provides some unique functions, which are not supported by any other diagnostic tool.

Diagnostics is performed via the OBD-II connector or via Mercedes-Benz proprietary 38-pin connector  (only older cars, pre-2001). Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz  diagnostics CAN-BUS interface (also known as CAN-D).

 Standard  diagnostic functions : 

•  Read Identification 
•  Read extended identification
• Read / clear  fault codes
• Scaning for control units  / clearing fault codes in all  control units 
• Display of actual values
• Actuator tests
• Reset of control units 
• Control unit adaptations
• Adjustment  of  injector injection quantities adaptation for Diesel Engines  (CDI-4 ,CDI - 5 )

Click here  To know what function and which control units are supported when you have a certain special function

Special Functions 

• BY OBDII -Comprehensive odometer correction for W221 and W216 vehicles. The odometer changed in the following units: CGW, EZS, Instrument Cluster and all other units, which store the odometer (like Tire Pressure Monitor and Adaptive Brake, for example) , Read/Write service history records in ZGW of W221 S-Class and W216 CL, Read/Write complete EEPROM and Flash of CGW (Central gateway) of W221 S-Class and W216 CL, Odometer correction in dashboard for Vito, Viano, Sprinter after 2006 year E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, C-Class W203 and G-Class W463  A-Class W169, B-Class W245

• BY OBDII - Odometer correction for W204/W212/X204/W197/W207 vehicles. The odometer is changed in the following units: ASSYST, ASSYST Plus, EZS, Instrument Cluster

• By OBDII - Read/Write EEPROM of Dashboard control units, ESP, Sensotronic Brake Control (SBC) and many others... Online manual for Sensotronic Brake Control Repair ALL FAULT TYPE 
• CLICK HERE FOR DOWNLOADING THE  SBC REPAIR  USER MANUAL  

• By OBDII - Airbag - Read/Write EEPROM, Clear Crash Data, Erase Motohours

• Dump Tool - calculate odometer values, reset odometer values, clear airbag crash data, make engine control virgin .... etc

•  By OBDII - ECU - Read/Write Flash, Read/Write EEPROM of Engine Control Units

•  DAS-2 - Generation of key dumps for vehicles with DAS-2 Immobilizer system

• By OBDII - DAS-2b - Key Learning for Mercedes W163; Read/Write EEPROM of AAM/EAM control modules; Learn radio code of transmitter keys; Deactivate/Reactivate keys

•  Transponder generation 

•  By OBDII - TV/AUX activation/deactivation

• By OBDII - TV/AUX activation/deactivation
• By OBDII - Seatbelt warning activation/deactivation  
• By OBDII - Reverse warning activation/deactivation
• By OBDII - Activation/deactivation of Speed warning for Gulf States
• Electrical Steering Lock (ESL) - Read/Write/Unlock EEPROM of ESL for the following vehicles: W202, W208, W209, W210, W203, W211, W219 by direct connection to the ESL module. Please, note that in order to erase or write the EEPROM of this type of ESL you need to have the ESL database. Please, find the links for the ESL database here: ESL Database
  
• Electrical Ignition Switch (EIS, K-Line) - Read EEPROM of EIS and ESL modules by diagnostic connection to the EIS module; Open/Close ESL

• Electrical Steering Lock (ESL, CAN) - Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS

•  Generation of Dumps for programming keys for cars, which use DAS-3 system. With the IR Key Manager special function you can generate keys for the following vehicles: W203, W208, W209, W210, W211, W215, W219, W220, W230, W639. The generated dumps should be programmed in the EZS, ESL and the key. For the key all NEC processors and the following Motorola processor is supported: MA 567 880 051, 654 367 2004 . For all owners of MN005 license - If you have a Motorola key (it doesn't matter if it is working key or not, as long as it is from the same car) we can send you working key dumps without the need to disassemble, desolder and read the EZS! Just read the EZS by diagnostics from the Special Function "EIS K-Line" and send the dump together with the dump from the Motorola key to simon.touch@hotmail.com" . We will send you working key dumps FREE of charge within 1 working day.

• ZN002 - NEC programer - for NEC MCU's assembled in the IR-Keys

• By OBDII - Change ASSYST PLUS Service maintenance records

• By OBDII - Read/Write COMPLETELY EEPROM of Central Gateway (CGW) via OBDII. Works for the following vehicles : W211, W171, W219, W164, X164, W169, W245, W204, W212, X204, W218 

• Custom request 
  

• By OBDII - SMART key teach-in (K-Line and CAN)

• By OBDII - Renew of 7-Gear Electronic Transmission Control Unit (722.9)

   http://www.youtube.com/watch?v=vgTri6Vujtw&;feature=youtu.be

 Advanced functions: 

•  Custom memory read/write 
•  Custom requests

P.S:  Depending on the  version that you have purchased some of these functions may not be availbale in your software  .

Prices of the Special  functions  :

MN020  -- 1730 EURO  Instrument Cluster Data Manager
Updating data memory instrument clusters W221, W216, W219, X164, W164, W203, W251, W463, R171, W209, W220, W215, W169, W245, Smart (2007+), W204, X204, W212, W197, W207, W218,W168,  W202, W140, W210, W211, W461, W208, W163, W230, Sprinter, Vito, Viano. Modifying ASSYST and ASSYST PLUS service history records; Updating data memory in Battery Control Module, Tire Pressure Monitor, Electric Seat Adjustment Driver and Electric Seat Adjustment Passenger, Rear Signal Acquisition and Actuation Module 1, Electronic Stability Program (ESP), Airbag, Electronic Parking Brake, Vehicle Power Supply Control Module.

MN021  -- 385 EURO TV, ECU, Airbag Manager
Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16. Service list update. TV, AUX on/off configuration. Ability for managing stored crash data and configuration memory of electronic control unit.

MN022--- 675 EURO Key Programming and EIS/ESL Data Manager
Generating of key dumps for vehicles with DAS-2, DAS-2A, DAS-2B, DAS-3.Smart key programming.  Read partially data of the EIS. Read/update configuration data of the ESL.

MN023 --- 1920 EURO 7-gear ETC and ISM recalibration
Resetting ETC (722.9) and ISM by diagnostic to the factory state without losing of SCN coding.

http://www.youtube.com/watch?v=vgTri6Vujtw&;;feature=youtu.be

The special function requires a database, which can be downloaded from here: http://update2.abritus72.net/downloads/Abritus-7-Gear-Database_05092012.exe

INTELIGENT SERVO MODULE DEMO  

Additional cables and programmers : 

• 38 pin Circle MB Cable - 24 euro 
• 14 pin Circle MB Cable - 24 euro 
• Cable for connecting AVDI and ESL(ELV) - 24 euro
• Cable for connecting AVDI and dashboard W203, W209, W211, W219 - 24 euro
• ZN002 - NEC programmer - 240 euro

Wiring diagrams for connecting and diagnosing control units out of the vehicle. 

Download the zip pdf folder these are user manual for comprehensive Mileage Recalibration

P.S :  you need our diagnostic interface AVDI to order the special functions .

      Mercedes nec key programming via infrared

 MB nec device , no need to send us the EIS anymore !
Device can program extra key to any EIS type ,repair a damaged key without removing any part
Repair MB 204 steering lock  and program new steering lock

A clear video for all procedure will be added after holiday on our you tube channel

Mercedes device can program new key ,fix or repair defective esl or program any ELV type like GL/204 steering lock  in few seconds.
With our device u don’t need  to virgin or erase the eis, also it will not erase the original working key .

P.S: For all customers who want to program only key without ESL  can buy the device excluding ESL option .

click here for our you tube video

    MB DUMP KEY GENERATOR FROM EIS

Now you can generate up to 8 keys BY YOURSELF .MB key generator from EIS DUMP ONLY without removing any part even for MB cars with 7 gears ,all you have to do is to read the EIS dump generate keys and start the car .

Supports  HC05 ,HC08,HC12,9S12 ,NEC EZS,204,221,212,207,164 .

Our software has a micro auto detect , all what you need is just to load the file  .

 NEW UPDATE IS AVAILABLE FOR A AND B CLASS 

 NEW : YOU CAN GENERATE KEYS WITHOUT TIME LIMIT SAME FOR A AND B CLASS

click here to see our youtube video for MB DUMP  

http://www.youtube.com/watch?v=dCGGpQUdlo0 

 MERCEDES EIS KEY TEST

plug the test key in any mercedes EIS

key led will show you if the eis is woking or deffective

              MB SOFTWARE

WITH OUR NEW  MB SOFTWARE YOU CAN GENERATE KEYS RENEW ECU UP TO 2006
 IN FEW SECONDS, YOU CAN USE OUR SOFTWARE FOR IR OR NEC PROGRAMMER .

UNIVERSAL MERCEDES TRANSPONDER FOR E / C AND G CLASS

This transponder is prepared  to program directly to the car ,just insert the key into the ignition and the transponder will program itself immediately  to start the car .

each transponder has its own number from 1 to 8 so you can program up to 8 keys to the same car .

price : 10 EURO

               MB  NEC PROGRAMMER

Mercedes NEC key programmer 

             Commander for DAF 1.0

Key learning by OBDII. No need FOR A  PIN code. Supported models from 2002-2008 year

Prices of the special functions:

 *DF002 - Key learning- 720 euro 
 FULL - all special functions - 720 euro

 MB ORIGINAL TESTING CABLE FOR 203 / 209/211 

              MB NEC KEY SOCKET

 Mercedes kits for Old 140/ Old SLK / Old 210 with HFM ECU AND EFZ with a flip key

 Das /202/208/210/203/209/211/220/230 with ME2.0 / ME 2.0

 We Have universal steering lock for 202/208/210/203/209/211 steering lock

(NO NEED TO USE STARDIAG TO PROGRAM IT) Ready to work price 100 USD 

            BMW COMMANDER 10.1

Commander for BMW is a PC - Windows based diagnostic software for dealer level access to the vehicle (identification, trouble codes and s.o.), mileage correction, key programming, programming vehicle order. Tool can access CAS1 and CAS2, CAS 3 AND CAS 3+  by OBDII.independend from the firmware of the CAS. Also you can perform unusual for remaining diagnostic tools operations with the electronic modules inside of the vehicle like programming Vehicle Order and Coding of electronic control units. Access to the EEPROM memory of the units in the vehicle. Covers vehicles BMW series starting from E36 up to latest models F series (F01,F10,F20,F25 and s.o.).

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
 ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 .... 

BASE PACKAGE INCLUDES

• Identification (VIN, mileage, production data)
• Read and clear diagnostic trouble codes (current, history and shadow)
• Added DTCs in 17 languages: English, German, French, Thai, Swedish, Italian, Spanish, Indonesian, Korean, Greek, Turkish, Chinese, Chinese traditional, Russian, Dutch, Portuguese, Japanese. DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)
• Some DTCs (mostly that of F series) are given detailed documentation of what caused the problem and how the problem should be handled
• Manager of service intervals, reset service reminders (CBS)
• Measured values/live data
• Read and Program Engine Control Unit flash memory for tuning purposes by OBDII
• Entering and leaving from logistic mode of the modules in the vehicle
• Synchronization DME/DDE and EWS/CAS, CAS and ELV
• Enable / Disable of the keys
• Enable / Disable of TV function for E3x,E46,E5x,E83,E85,E86 (for the next bodies available via unit coding)
• Ability for diagnostic on internal CAN buses
• Read / Program mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer coverage list)
• Displaying KEY CUTTING code (mechanical code) stored in CAS modules
• EBRIDGE/Passthru - Compatibility with BMW - E-Sys, DIS, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

     SPECIAL  FUNCTIONS :

• EGS synchronization code between CAS and ECU recovery
  
• Service intervals/CBS - ability for programming of service counters by OBDII
• Programming flash memory of all electronic control units by OBDII (can be used directly databases released from BMW)
• Programming Vehicle Order data (you can add new units to configuration of the vehicle) - E body
• Coding (configuration) of each electronic control unit in the vehicle - E body
• Programming identification of the modules in the vehicle *
• Programming User Information Fields in the electronic modules *
• Read / Write of memory of the electronic control modules *
• Program mileage stored in CAS1, CAS2 and CAS3 by OBDII
• Program keys by OBDII - CAS1, CAS2 and CAS3 systems - support latest versions CAS3 updated in 2011 year
• Key programming for CAS3+ with latest firmware version (ISTA-P 48)
• Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 5, 5 GT, 6, 7, X3 series ( body Fxx)
  
• Read / Write eeprom from CAS1 via OBDII
• Read / Write eeprom data from CAS2/CAS3 via dash connector or cas-connector
• Read / Program mileage stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others
• Extracting and programming synchronization code between ECU and CAS by OBDII
• Ability to works together with transponder programmer
  * Not granted for all type of control modules.

Future software updates will have the following special functions:
 EGS / CAS alignment procedure
 Adjustment of injectors

PRICES OF THE SPECIAL  FUNCTIONS

*BN005 - Advanced coding functions - 480 EURO 
Read and program vehicle order data, reprogramming flash memory of all electronic control units

*BN009/KT007 - Key preparation by dump of CAS4 - 2400 EURO**
Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 5, 5 GT, 6, 7, X3 series ( body Fxx)

*BN010 - Memory Manager; CAS1 E65 and CAS2; CAS3/CAS3+ -1920 EURO *
Programming identification of the units, user information fields, read/write memory of the units
Programming keys for vehicles equipped with CAS1/CAS2/CAS3/CAS3+ by OBDII or cas/dash plug. Programming mileage stored in CAS1/CAS2/CAS3/CAS3+ by OBDII. Read/write eeprom of CAS2/CAS3 by cas/dash plug

*BN011 - EGS synchronization code between CAS and ECU recovery -960 EURO

BMW Package 1 (BN005+BN010+BN011) - 2880 EURO
BMW Package 2 (BN005+BN009+BN010+BN011) - 4896 EURO

* All customers that have previously obtained special functions may update to the new function BN010

Price for update from BN002 to BN010 - 1200 EURO 
Price for update from BN002+3 to BN010 - 1040 EURO
Price for update from BN002+3+4 to BN010 - 960 EURO
Price for update from BN002+3+4+6 to BN010 - 560 EURO
Price for update from BN006 to BN010 - 1040 EURO
Price for update from BN006+8 to BN010 - FREE

FOOTNOTE :  ** Programmer is also needed - ZN001 - TAG programmer - PRICE  480 EURO

Note: Ordering for the special functions is possible only if you have our diagnostic interface AVDI  --  PRICE 700 EUR 

BMW KEY LEARNING DEVICE L5 BY OBD II 

        ALL  E SERIES CAS MODELS FROM 2004 TILL 2013

         NO PC NEEDED / NO PIN CODE NEEDED

 BMW key/transponder programming device via OBD II L2-2004-2010/L3-2004-2011 CAS 3+

                                NO PC NEEDED  

E60/ E61 /E63 /E64/ E65/ E70/ E71/ E87/ E90/ E91/ E92/ E93 .

Just plug the device in OBD and program new transponder or key in few seconds, we have 2 types Of this device one up to 2010 and new one 2011 cas 3 + 
  P.S : We sell original keys

check below our youtube videos 

 http://www.youtube.com/watch?v=oz9vmlRy_qg

http://www.youtube.com/watch?v=NI58sY-lWjc&;feature=related

http://www.youtube.com/watch?v=Dleijbis_oY 

       BMW L4 key/transponder programming device via OBD II 

          FOR LATEST BLOCKED CAS VERSION 45/46+

                         NO PC NEEDED  

    BMW key programming device for EWS 3 and 3+

8 keys can be programmed with this device EWS 3/3+ module.
Another feature of the device is to erase the old or lost keys,
add new keys on whatever position you want from 0 to 7 as you leave the existing keys working.
our special transponder made for this Device must be used .
The Device comes with 5 transponders for EWS 3/3+ AND ONE UNLOCK TRANSPONDER THAT YOU CAN USE IT ON MANY CARS FOR TEST.
No need of a PC or power supply when using this device . There is no need of desoldering the processor,  just plug the Device on the processor and program new keys in a second
 With the EWS 3 AND 3+ you can reset the odometer inside the EWS module or renew it.

            BMW / RANGE ROVER  KEY BATTERY

                 M35080 BMW DASH EEPROM 

     BMW CAN FILTER FOR BMW F01/ F02 / F10 / F11 

                 WITH MICRO 5M48H

                         Commander for Porsche 5.0

Commander for Porsche is a professional software for diagnostic of Porsche vehicles.
It is capable to perform a diagnostic for any unit.
It provides some unique functions, which are not supported by any other diagnostic tool.

ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 .... 

Supported vehicles:

• Carrera GT
• Carrera GT2 (996)
• Carrera GT3 (996)
• Boxster (986)
• Boxster S (986)
• Boxster (997)
• Cayman (987)
• Cayenne (955)
• 911 (997)
• 911 Turbo (996)
• 911 Turbo (997)
• 911 Carrera 4 (996)
• Boxster 991 (2012+)
• 911 991 (2012+)
• Cayenne 958 (2011+)
• Panamera 970 (2010+)

Standard diagnostic functions:

• For all electronic control units reading identification data
• For all electronic control units read error (DTCs)
• For all electronic control units clear error (DTCs)
• For 911 997, Boxster 987, Cayman, Cayenne electronic control units - live data
• For 911 997, Boxster 987, Cayman, Cayenne electronic units read/write coding
• Broadcast - for the chosen model - scan all units and clear all DTCs

Special  Functions : 

• Engine Control Unit 
  - ME7.x, ME7.5, ME7.8- Read/Write EEprom, Flash, Read Component Security bytes, Read Sec.access code, ECU Data 
  - ME5.2, ME7.2 - Read EEprom
  - ME 7.8 - Porsche 9x7, 9x6 -Read EEprom 
• Instrument Cluster K-Line 
  - Porsche Cayenne - Read/Write EEprom, Read/Change odometer
  - Porsche 911, Boxter, GT2, GT3 (9x6) with 93c56 - 1998 - 07/2001 year - Read/Write eeprom, Read/Change odometer
  - Porsche 911, Boxter, GT2, GT3 (9x6) with 93c86 - 08/2001 - 2005 year - Read/Write eeprom, Read/Change odometer 
• Insrtument Cluster CAN
  - Porsche Cayenne - Read/Write EEprom, Read/Change odometer
  - Porsche 9x7 - Mileage recalibration, Read/Write EEPROM, Reset service interval, Total distance, Oil level measurement 
• Dump Tool
  - IMMO - Kessy - Porsche Cayenne [93c86] - shows Sec.access code, Keys data, VIN, Immo number 
  - ECU ME7.x Reset Component protection data
  - ECU ME7.x Security code / Checksum calculator 
  - Change Odometer ECU ME9 [95320] - Porsche 997 
  - Change Odometer 95P08 - Porsche 996
  - Change Odometer 95P08 - Porsche 997

Ferrari / Lamborghini

         COMMANDER FOR VAG V19.0

The Commander for VAG is a Windows PC based diagnostic software for the vehicles from VAG.
With the help of this tool you can perform operations with vehicles from the VAG group,
which are in most cases unsupported from the producer diagnostic testers.
The Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.

 ALL OTHER COMMANDERS SOFTWARES CAN BE ADDED TO THE SAME AVDI
ALSO ORIGINAL SOFTWARES LIKE STAR DIAGNOSE /GT1 .... 

Highlights:

• Extracting security access codes (PIN) by OBDII
• Programming keys by OBDII. Preparation of dealer's keys.
• Mileage recalibration by OBDII
• Clearing crash data DTCs by OBDII
• Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
• Exchange speed limit of MMI-TV system
• Coding calculator - supported short/long coding
• Synchronization/Adaptation KESSY and ELV

 Standard diagnostic functions:

• Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
• For all electronic control units reading identification data
• For all electronic control units read error (DTCs)
• For all electronic control units clear error (DTCs)
• Output tests
• Control unit coding
• Scan all units
• Broadcast requests
• Measured values
• Adaptation

RANGE ROVER /LAND ROVER / JAGUAR KEY LEARNING DEVICE BY OBD II 2010-2015

                                     NO PC NEEDED / NO PIN CODE NEEDED

New update for R/L/J stand alone key programmer ready to cover latest versions that support CAN based models from 2010 up to 2015.
Programmer needs 15 to 25 seconds to learn a new key if the is no fault codes in the air transmitting of the signal from the intelligent key module.
If there is a fault, device need 25 seconds to clear the fault and learn a new key.
Device program the maximum of 8 keys in the immobilizer module memory.
Put (video link) sent on your whats app 23 seconds.

Just plug the device into OBD II and learn a new key remote in few seconds

Range Rover sport -  2010 -2013

Range Rover mark III - 2010 -2013

Range Rover mark IV- 2010 -2013

Range Rover E voque 2012-2013

Land Rover Discovery IV-2010 -2013

Land Rover freelander II- 2012-2013

Jaguar XF - 2010-2013

Jaguar XJ - 2010 -2013

click here to check our you tube video